The valve retainer is the small cap that holds the valve spring onto the valve. It moves up and down with the valve on every engine cycle, thousands of times a minute. Swapping a steel retainer for a titanium one is one of the most popular valvetrain upgrades for supercharged jet skis, and here's why.
Why weight matters
The spring has to control everything that moves with the valve: the valve, the retainer, the locks and part of the spring itself. The lighter that assembly is, the easier it is for the spring to keep the valve following the cam at high RPM. Titanium is much lighter than steel at similar strength, so titanium retainers reduce the mass the spring has to control and add a margin against valve float.
Titanium retainers with stock springs
On the Yamaha 1.8L SVHO / SHO, our titanium retainers are designed to drop in with the stock springs. They're a simple first upgrade for a lightly modified ski.
When you need springs too
If you've changed pulleys, raised boost, installed a cam or raised the rev limit, retainers alone usually aren't enough. Choose a matched spring and retainer kit:
- Sea-Doo 1630 ACE 300 / 1503 Valve Spring & Titanium Retainer Kit: 12 dual springs and 12 titanium retainers
- Yamaha 1.8L SVHO Single Spring Kit: matched for 10,500 RPM with a VXR cam
- Yamaha 1.8L SVHO Dual Spring Kit: for built and race engines
Our Sea-Doo titanium retainers are designed for our Sea-Doo dual springs, so Sea-Doo owners should start with the full kit or pair them with our dual valve springs.
Made for the job
Pro Valve Racing titanium retainers are CNC-machined from certified aerospace-grade titanium alloy and designed as part of a complete valvetrain system. Browse all jet ski valvetrain parts, or call 561-246-4568 to talk through your build.




